The highest performance stand of the SXR line, our SXR Signature is near reference level performance with the ability to properly isolate components over 150 lb.
The SXR Signature Series frame is built on the same foundation as the SXR Series Frames. The SXR Signature Series upgrade is achieved by adding the SXR Solid Brace Insert to each isolation base location in the frame. The SXR Solid Brace Inserts triple the number of cross braces, pretensions the frame, and add four friction dampers and two compression dampers at each component location (Isolation Base location). The added mass, stiffness, control, and energy absorption capability provided by the addition of the SXR Solid Brace Inserts push the performance of the SXR frame towards that of the very ambitious reference level HRS VXR Audio Stands.
You can purchase the entire SXR Signature or you can upgrade any SXR Audio Stand frame to become an SXR Signature Series frame by purchasing the additional SXR Solid Brace Inserts when you are ready to upgrade your system. You can even purchase the SXR Solid Brace Inserts one component location at a time, which makes the SXR Signature Series an exceptional value as the upgrade path is 100% additive. You will never have to sell or trade from one stand to another to achieve this exceptional level of performance.
Typical standard SXR Singature Audio Stand frame configurations are shown below. This is a small sample of available configurations. Please consult your authorized HRS dealer to determine the best configuration for your system needs. If you don’t see something below that will fit your system’s configurations, HRS has experience and the utmost ability in creating a custom SXR Signature Audio Stand to meet your requirements.
The SXR Cable Organizer can be attached vertically to the back of the SXR Audio Stand.
The Cable Organizer is primarily to clean up the look of your system as well as providing a more cosmetic appearance. You will secure the cable to the frame which does add stability to the cables but it is not intended to be a performance option.
“The SXR Signature Audio Stand provides the infinite configuration flexibility of the SXR Series Audio Stands but adds the ambition of the reference level performance achieved by the VXR Audio Stands. If you are looking for reference inspired performance and modularity that will adapt to any system change, then the SXR Signature was designed specifically to suit your needs.”
| MODEL | DIMENSIONS (W X D X H) INCHES (CM) *Height based on 8″ component spacing and includes SXR Solid Brace Insert | ISOLATION BASE SIZE INCHES (CM) | NUMBER OF ISOLATION BASES |
| *Actual component space with Solid Brace Inserts is 7.6" | |||
| SXR-1921-1V with SXR Solid Brace Insert -B (BLACK) -S (SILVER) | 27.2″ X 19″ X 7.4″ (69 X 48.3 X 18.5) | 21″ W 19″ D (53.3 W 48.3 D) | 1 |
| SXR-1921-2V with SXR Solid Brace Inserts -B (BLACK) -S (SILVER) | 27.2″ X 19″ X 18.9″ (69 X 48.3 X 47.8) | 21″ W 19″ D (53.3 W 48.3 D) | 2 |
| SXR-1921-3V with SXR Solid Brace Inserts -B (BLACK) -S (SILVER) | 27.2″ X 19″ X 30.4″ (69 X 48.3 X 77.2) | 21″ W 19″ D (53.3 W 48.3 D) | 3 |
| SXR-1921-4V with SXR Solid Brace Inserts -B (BLACK) -S (SILVER) | 27.2″ X 19″ X 41.9″ (69 X 48.3 X 106.4) | 21″ W 19″ D (53.3 W 48.3 D) | 4 |
| SXR-1719-1V with Solid Brace Insert -B (BLACK) -S (SILVER) | 25.2″ X 17″ X 7.4″ (64 X 43 X 18.5) | 19″ W 17″ D (48.3 W 43.2 D) | 1 |
| SXR-1719-2V with Solid Brace Inserts -B (BLACK) -S (SILVER) | 25.2″ X 17″ X 18.9″ (64 X 43 X 47.8) | 19″ W 17″ D (48.3 W 43.2 D) | 2 |
| SXR-1719-3V with Solid Brace Inserts -B (BLACK) -S (SILVER) | 25.2″ X 17″ X 30.4″ (64 X 43 X 77.2) | 19″ W 17″ D (48.3 W 43.2 D) | 3 |
| SXR-1719-4V with Solid Brace Inserts -B (BLACK) -S (SILVER) | 25.2″ X 17″ X 41.9″ (64 X 43 X 106.4) | 19″ W 17″ D (48.3 W 43.2 D) | 4 |
| *The use of SXR Solid Brace Inserts decreases the component spacing by .38" |
Note:
HRS Floor Protectors are included with SXR Audio Stands.
